3M™ Heat Shrink Heavy-Wall Cable Sleeves ITCSN
- | Select product options for IDs.
Details
Highlights
- Provides protection and sealing of 1000 volt joints, connections and terminations in indoor and outdoor applications
- VOLTAGE: UL 486D, Voltage Rating 600 V; Applies to: ITCSN 0400, 0800, 1100, 1500, 2000; CSA Certified ITCSN 0400, 0800, 1100, 1500, 2000, 3000
- Adhesive-lined, split resistant, fast shrinking, and made from cross-linked polyolefin; non-adhesive options are also available
- Delivers mechanical and environmental protection against abrasion, corrosion, and chemicals
3M™ Heat Shrink Heavy-Wall Cable Sleeve ITCSN Series are adhesive lined, thick wall polyolefin tubing with a shrink ratio as high as 4:1. ITCSN heat shrink is a split resistant tubing designed to provide reliable performance for electrical splices, connections and terminations, as well as mechanical and abrasion resistance.
Typical Properties
| Adhesive Lined | Yes |
| Adhesive Material | Hot melt adhesive layer, Hot-melt adhesive |
| Applicable SAE-AMS-DTL-23053 Specifications | 23053/15 class 2 |
| Application Specifications | UL Listed 486 D for 600V, File Number E102356; CSA Certified File LR86335 |
| Brands | 3M™ |
| Cable Size Range | 12-6 AWG, 2-4/0 AWG, 8-1/0 AWG, 250-750 kcmil, 600-1250 kcmil, 2.1-4.8 in |
| Case Quantity | 20 |
| Dielectric Strength (V/mil) | 500 V/mil |
| Direct Bury | No, Yes |
| Elongation | 4.75 Percent |
| Expanded Inner Diameter (metric) | 10.2 mm, 20.3 mm, 27.9 mm, 50.8 mm, 76.2 mm, 152.4 mm |
| Flame Retardant | No |
| Flammability Rating | Non-Flame Retardant |
| Heat Shrink Type | Heavy-Duty Heat Shrink Tubing |
| Inner Diameter After Shrink (Metric) | 0.381 mm, 0.508 cm², 1.651 cm², 1.8 cm², 2.54 cm², 5.1 mm |
| Inner Diameter Before Shrink (Metric) | 1.016 mm, 2.032 cm², 5.08 cm², 6 cm², 7.62 cm², 20.3 mm |
| Material | Polyolefin, Adhesive-lined Polyolefin |
| Maximum Operating Temperature (Celsius) | 100 ℃, 110 ℃ |
| Maximum Voltage Rating | 1 kV |
| Mil Spec | AMS-DTL-23053/15,Class 1, SAE-AMS-DTL-23053/15, Class 1 |
| Minimum Expanded Tubing I. D. | 0.4 in, 0.8 in, 2 in, 3 in, 6 in |
| Minimum Shrink Temperature | 121 ℃ |
| Non-Corrosive | Yes |
| Operating Temperature (Celsius) | -55 to 100 Degrees Celsius |
| Operating Temperature Range (Celsius) | -55 °C to -100 °C, -55 °C to +110 °C |
| Product Colour | Black |
| Product Form | Sleeve-roll |
| Product Type | Splice, Sleeve |
| Recovered Inner Diameter (metric) | 3.8 mm, 5.1 mm, 9.4 mm, 16.5 mm, 25.4 mm, 45.7 mm |
| Shrink Ratio | 3:1, 4:1 |
| Solution for | Access Network: xDSL, Access Network: FTTH/FTTB/CATV, Wireless Network: Backhaul, Longhaul/Metro Loop Network: Outdoor, Longhaul/Metro Loop Network: CO/POP |
| Splice Configuration | Heat Shrink Heavy-Wall Cable Sleeve (ITCSN) |
| Splice Type | Heat Shrink |
| Tubing Type | Heavy Wall |
| UL File Number | E-102356 |
| Units per Case | 20.0 |
| Voltage | 1 kV |
| Voltage Rating | 600 V, UL Rated to 600 V (Shall not exceed 1 kV) |
| Overall Length (Metric) | 1219 mm |
| Overall Width (Metric) | 1219.2 mm |
Similar products
| Inner Diameter After Shrink (Metric) | 0.381 mm, 0.508 cm², 1.651 cm², 1.8 cm², 2.54 cm², 5.1 mm | |
| Inner Diameter Before Shrink (Metric) | 1.016 mm, 2.032 cm², 5.08 cm², 6 cm², 7.62 cm², 20.3 mm | |
| Maximum Operating Temperature (Celsius) | 100 ℃, 110 ℃ |
3M™ Heat Shrink Heavy-Wall Cable Sleeves ITCSN
3M™ Heat Shrink Tubing IMCSN