3M™ DIN Threaded Gas, Vapour and Particulate Filters are AS/NZS 1716 approved and conveniently provide protection against a wide range of gases, vapours and particulates depending on the model selected. They have a DIN Threaded connection that fits any 3M™ DIN Thread Reusable Respirator. These filters offer heavy duty breathing protection for a wide range of hazardous environments.
Designed for heavy duty applications, 3M™ DIN Threaded Gas, Vapour and Particulate Filters are easy to install. Simply choose the filter type that’s suitable for your individual needs and requirements, align the connection and twist to secure. 3M™ DIN Threaded Gas, Vapour and Particulate Filters are compatible with 3M™ Reusable Respirators FF-300, FF-600 and FF-600F. In addition they are also compatible with 3M™ Powered Air Respirator PF-600E-ASB, thus helping to reduce inventory needs. Easy breathing: 3M™ DIN Threaded Gas, Vapour and Particulate Filters are designed to balance breathability and long service life. Gas and vapour cartridges use carbon particles to adsorb contaminants, filtering the air that you breathe. 3M™ DIN Threaded Gas, Vapour and Particulate Filters provide protection against a wide range of gases, vapours and particulates. Designed for use in multiple industrial applications. 3M™ DIN Threaded Gas, Vapour and Particulate Filters are AS/NZS 1716 approved to protect against particulates and help provide respiratory protection from certain gases or vapours. Not for use in environments that are immediately dangerous to life or health (IDLH). NOTE: The DT-4045E is a dual rated/labelled filter for both negative pressure full facepiece respirators (FF-300, FF-600 & FF-600F) and the positive pressure PAPR PF-600E-ASB. Due to the constant flow rate on the PF-600E-ASB PAPR, this filer is rated at PAPR-B1E1K1P3 to AS/NZS 1716 with nuisance level capacity for organic vapours in this combination. This filter in the negative pressure full facepiece combination is rated and coloured A2B2E2K2P3 to AS/NZS 1716.