3M
™
Non-Structural Adhesives
3M
™
Scotch-Weld
™
Industrial Adhesives and
3M
™
Fastbond
™
Industrial Adhesives
Benefits
• Sprayable and brushable
• Rubber and plastic bonding
• Low VOC options
Ideal Markets
• Furniture/ Upholstery
• Air Conditioning
• Aerospace
• Commercial Vehicle
• General Manufacturing
To prevent moisture penetration,
a pressure flow gun applies
3M™ Scotch-Weld™ Nitrile High
Performance Rubber and Gasket
Adhesive 847 to a rubber gasket in a
commercial light fixture cover.
In cabinet assembly, 3M™
Fastbond™ Contact Adhesive 30NF
is a proven formulation. Combining an
open time of up to 4 hours with high
immediate bond strength. Apply with
roller, brush, or spray gun.
HVAC duct insulation is easy and
economical to apply with 3M™
Fastbond™ Insulation Adhesive 49.
This single-component, water based
pressure sensitive formulation speeds
up assembly with instant tack.
3M™ Fastbond™ Foam Adhesive 100
is a one-part, water-dispersed
formulation for bonding many porous
substrates to porous or non-porous
substrates with minimal dry time.
Performance for non-structural bonding
challenges
3M Scotch-Weld and Fastbond adhesives are industrial tools
designed to provide innovative solutions to a wide variety of
non-structural bonding needs. This line offers a wide range
of choices for flexible and contact adhesive applications.
Select from bonding ranges, strength, solids content and
solvent or water-based formulations to meet requirements
for bonding rubber, plastic, wood, laminate, foam and more.
In this range you will find the water-based pioneer 3M™
Fastbond™ Contact Adhesive 30NF - proven for over 40
years in carpentry and joinery applications.
The 3M
™
Fastbond
™
Adhesive Story
While competition pressures you to improve productivity,
regulatory legislation demands that you move toward more
environmentally-responsible technologies and away from
traditional solvent-based contact adhesives.
By replacing solvent-based adhesives with a water-based 3M
Fastbond adhesive, compliance is getting easier in more and
more applications. At the same time, you have a choice of
production and end-use characteristics as you can see in the
chart at far right.
Carrier
Water
Chlorinated
Solvents
Flammable
Solvents
% Solids
50%
15%
20%
Density (lbs/gal)
9.1
10.8
6.7
lbs. of adhesive/gal
4.6
1.6
1.3
Relative coverage
3.4
1.2
1.0
Issues
Toxicity
Flammability
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
Water
Chlorinated
Solvents
Flammable
Solvents
Relative Coverage
14
